Clover Diamond Floor Polish
Diamond Floor Po

USED ON:

• Linoleum, PVC/Vinyl
• Rubber, Laminate
• Sealed wood
• Marble

• High quality shine for improved appearance
• Thermoplastic polymer protects the floor
• Builds good slip-resistance - no health and safety concerns

PREPARATION:

To obtain optimum results, it is important that thorough preparation of the floor is undertaken. The floor must be thoroughly cleaned to remove all dirt, grease and old polish films by using a quality polish remover such as Clover Chemicals' REMOVE or ZIP STRIP. The floor must be well rinsed with water and allowed to dry before applying DIAMOND.

APPLICATION:

Apply a thin film of DIAMOND (undiluted) using a mop or polish applicator. Drying time is normally around 30 minutes. Apply a second coat and allow to dry. Coverage is dependent on the porosity of the floor covering. In general, 5 litres of DIAMOND will cover approximately 250 square metres of floor.