PRochem Aqua-Seal Fabric Protector 5lt
B130-05

A water-based, fluorochemical soil and stain repellent treatment for synthetic fabrics including nylon, polyester, acrylic and their blends with natural cellulosic fibres.

Aqua-Seal Fabric Protector is ready-to-use. DO NOT dilute with water. Before proceeding with application, always pre-test an inconspicuous area of the fabric with Aqua-Seal Fabric Protector and allow to dry. Check for any change in colour, shade or texture of the fabric. Do not apply to water sensitive fabrics. Ensure fabric is clean and free of any shampoo or detergent residue. It is recommended that newly cleaned fabric is finally rinsed with B109 Fibre & Fabric Rinse according to label directions.

Aqua-Seal Fabric Protector must be the last treatment applied to the fabric and can be applied to dry fabric or damp fabric after extraction cleaning and rinsing. Apply Aqua-Seal Fabric Protector evenly by fabric protector spray applicator. Do not apply Aqua-Seal Fabric Protector by trigger sprayer or pump-up sprayer. Important - Do not aerosolise or produce fine spray mists or respirable particles. Coverage should be approx. 1 litre per 15m2 of fabric. Lightly brush protector into fabric with natural fibre upholstery brush and leave fabric to dry completely before use.